Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #13

Edit by Michael Hackney

Edit approved by Michael Hackney

Deleted
Added
Unchanged

Step Lines

[title] Module 5: Spool Front and Handle
[* icon_note] ++PREP NOTE:++ if you'd like the exposed sidePREP NOTE: Both sides of yourthe '''front spool plate to be untextured, you will need to(19)''' are visible so sand offand polish the textured finish. Lightly sand with 320 grit, then complete with 400 and 600 grit sandpaper and polishsmooth side. Choose which face you want showing when you install it.
[* black] Insert the '''flatbutton head screw (20)''' so its head fits intothrough the countersinkback side of the '''front spool plate'''.
[* black] The second photo shows the proper orientation forPlace the '''handle bolster (21)'''. Note that21)''' over the countersunk side faces towardsscrew and secure it with the '''spool plate (19)'''.
[* icon_caution] IMPORTANT: If you install
handle spindle (22)''' as shown in the bolster the wrong way,second photo using the handle will not rotate freelyprovided Allen wrench.
[* black] The last photo shows howSee the '''handle spindle (22)''' screws ontovideo in the '''flat head screw'''. Tighten this screw snuglynext step for details on installing the handle.
[* icon_note] ++PREP NOTE:++ if you'd like the exposed sidePREP NOTE: Both sides of yourthe '''front spool plate to be untextured, you will need to(19)''' are visible so sand offand polish the textured finish. Lightly sand with 320 grit, then complete with 400 and 600 grit sandpaper and polishsmooth side. Choose which face you want showing when you install it.
[* black] Insert the '''flatbutton head screw (20)''' so its head fits intothrough the countersinkback side of the '''front spool plate'''.
[* black] The second photo shows the proper orientation forPlace the '''handle bolster (21)'''. Note that21)''' over the countersunk side faces towardsscrew and secure it with the '''spool plate (19)'''.
[* icon_caution] IMPORTANT: If you install
handle spindle (22)''' as shown in the bolster the wrong way,second photo using the handle will not rotate freelyprovided Allen wrench.
[* black] The last photo shows howSee the '''handle spindle (22)''' screws ontovideo in the '''flat head screw'''. Tighten this screw snuglynext step for details on installing the handle.

Image 1

Old Version

New Version

Image 2

Old Version

New Version

Image 3

Old Version

New Version