Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #13

Edit by Michael Hackney

Edit approved by Michael Hackney

Deleted
Added
Unchanged

Step Lines

[title] Module 5: Spool Front and Handle
[* black] ++PREP NOTE:++ if you'd like the outer surface of your spool plate to be shiny, you will need to sand off the textured finish. Lightly sand with 320 grit, then complete with 400 and 600 grit sandpaper.
[* black] Insert the FLAT HEAD screw so its head fits into the countersink.
[* black] The second photo shows the proper orientation for the HANDLE BOLSTER. Note that the countersunk side faces towards the SPOOL PLATE.
[* [* black] ''NOTE: This step is important, if you install it the other way around, the handle will not rotate freely.''
[* [* black] ''NOTE: This step is important, if you install it the other way around, the handle will not rotate freely.''
[* black] The last photo shows how the HANDLE SPINDLE screws onto the FLAT HEAD screw. Firmly tighten this screw.

Image 2

Old Version

New Version